Beach Huts

I'm still liking Beach Huts; those little cabanas that you see on the beach are so cute! I found this image for an inspiration shot:

 

First it inspired some pillows and here's an example:

Then I went on to make some little beach cabana appliques and attempt to mimic the beach. I ended up with a small table top runner, 14" x 24". The center is deep blue representing the water. The edges are natural burlap representing the sandy beach. And, I've placed the beach cabanas near the 'shore'.

It was fun to make and I think it turned out pretty cute! I'm trying to make smaller sized table top because I've received feedback that some of the table runners are too large for some furniture. While longer ones work well for dining room tables, many want to have just a little something for a coffee or end table, or even for a kitchen counter.

This item is going to be posted on Etsy for sale. Visit http://www.etsy.com/shop/Floatinteriors to check it out.

 



Outdoor Canvas - Something you should know

Hello! Outdoor canvas is a wonderful fabric for pillows, cushions, you name it! There is a huge variety of colors and patterns to choose from. But, something you should know if you are purchasing handmade products made of this fabric -- it unravels! So what's the big deal about that you ask? Well after continued use you may find that your seams are fraying, which is absolutely not good.

 

In order to prevent this from happening, the edges must be sewn with a serger to lock the edges and prevent fraying. I serge all of the edges on everything I make with outdoor canvas to prevent this and to create a clean, finished seam.

 

When you are shopping online for pillow covers, pillows, cushions, etc. always ask the crafter if the raw edges are serged to make sure you are getting the quality you deserve!

 

 

Nautical Shabby Chic Runner

I just finished this runner and really like how it turned out. It's made of natural burlap, woven with jute and appliqued with  gauze-like linen waves. I wanted the look to be very raw and all natural looking.

Here's how it was made:

I started by measuring and cutting my piece of  burlap. Then I created a paper template of waves, pinned it to my gauze, which I had backed with a fusible fabric stabilizer, and cut it out.

I then pulled out a couple strands and wove in a piece of jute the full length of the runner on each end. Taking a large embroidery needle, I wove in a couple strands of an off-white burlap for some contrast.

Next step was to pin the applique waves in place. And, with my machine set at a very small, tight zig zag, I sewed the applique to the runner. This was a bit tricky with all the twists and turns.





Last, all the edges were zig zagged to lock the weave in place so it will not unravel. I then apply a light starch with a hot iron to flatten and add body to the material. The look is just what I was after -- shabby chic, beachy, nautical and natural! Hope you like it. It's for sale in my Etsy Shop, www.etsy.com/shop/Floatinteriors.

Inspired by being lazy!

 

I got this wonderful citrus colored fabric, Robert Allen's Beach Bongo, for making a couple of pillow covers. This is an indoor/outdoor fabric, which I love. After I cut my pillows out I noticed I had a chunk of fabric left over that had some of the seashells on it. I decided to cut the seashells out and make them into appliques, which I then stitched on to pieces of bright green burlap.

Well, now what. I thought about sewing them on to pillows, but I already had pillows. What about a runner that could be thrown over an outdoor table that would look great with the pillows tossed on to accompanying chairs. I just happened to have enough bright orange burlap. What luck!

I cut the runner, and placed the appliques when I realized I didn't have any orange thread.  I didn't want to sew the appliques on to the runner and be able to see a different color thread on the backside.

 

Here's where the lazy part kicks in -- I was too lazy to drive to the fabric store to buy orange thread, so I decided I'd sew the appliques on by hand using strands of the orange burlap. 

Liking the look of this, I then wove some of the green burlap threads along both long sides to frame the appliques. But now I had to figure out how I was going to 'lock' the long edges so they would not fray. This is normally where I would have sewn them by machine, but again, no orange thread.  Well, I remembered my cross-stitching from years ago and decided this was going to be the solution. I love the look, but the problem with cross-stitching is that IT TAKES SO DARN LONG TO DO!

 

Oh well, as I mentioned, I was too lazy to drive to the fabric store to buy orange thread...so that's how this particular runner was designed.

 

Fabric Changes Everything!

Here's just an example of how you can change the décor of a room inexpensively. I tend to use my room for photo shoots a lot because of the neutral bedding, but if you start with a neutral quilt and drapery panels, you can change your décor as the seasons, or, as your mood changes. The possibilities are endless!

Nautical Christmas

My love of working with burlap continues. I've had a lot of fun making these items. Here's a nautical garland I just finished. It has small 'flags' portraying boats carrying Christmas to port, larger Christmas trees, and fringe with bows. I hand cut all the appliques and iron then sew them on. Finding all sorts of holiday trims to add sparkle has also been a lot of fun.

Then I got hooked on beach cabanas. I just think they are so cute. I created this holiday table topper with a small cabana along side a swaying palm tree in opposite corners.

Next I headed out to the beach to pick up just the perfect size pieces of driftwood to use in creating beach cabana ornaments.

 

 

Driftwood Candles Centerpiece

 

I made this centerpiece for my table. I found the 3 glass cylinders at Joann Fabrics for 40% off.

They also had the flameless real wax candles for which I used a coupon :-)

I cut three pieces of green floral Styrofoam to create candle pedestals for inside the cylinders. I then surrounded them with pieces of driftwood and Petoskey stones to hide them and hold them in place. You can use narrow blocks of wood as well, but that required power tools; the foam just required a butter knife! The candles sit on the top of the green foam. You can pick them up easily to turn on the switch on the bottom to produce the flickering. I felt flameless candles were a better bet with dry driftwood from a safety standpoint.

The cylinders measure 12"H x 6" dia.; 8"H x 6" dia., 10"H x3-1/2" dia. 

I love how they turned out!